 |
How the Carat S tank
is put together. |
| Watch the video on how the Carat S tank gets put together. |
|
|
|
 |
|
 |
|
| The only rainwater underground tank of its kind! |
| • |
Unlike other underground tanks, the wall thickness is equal
in all areas
of the tank. |
| • |
The tank is made from Duralen®, a high quality material that
is extremely
rigid and impact resistant. |
| • |
Unique fit accuracy of the components. |
| • |
Constant quality through safety testing. |
| • |
Suitable for vehicle loading combined with the cast iron
telescopic dome
shaft. |
| • |
Groundwater-stable up to the middle of the tank, thanks
to extremely
stable construction. |
| • |
Easy to transport. |
| • |
Investment security thanks to 15 year warranty. |
| • |
Can be expanded as often as required. |
|
|
|
| |
| |
 |
Dome entry shaft (2 seals) |
The Carat S underground tank has numerous seals to effectively
stop dirt
getting into the tank. This means that seepage water cannot get into the
tank and, thus, dirt particles cannot contaminate the rainwater.
|
|
 |
Encircling stabilization ring in unique H profile |
The Carat S underground tank has a unique profile for more
stability.
Thanks to additional ribbing, the tank suffers no significant
warping even
under extreme loads.
|
|
 |
Ribbed tank base |
The tank base of is extremely stable thanks to the numerous ribs.
These
enable the tank to be installed in groundwater up to the
middle of the tank.
This stability also means the tank is robust for transportation to site.
|
|
| |
|
|
| |
| Dimensions |
2700 litres |
3750 litres |
4800 litres |
6500 litres |
| Length: |
2080mm |
2280mm |
2280mm |
2390mm |
| Width: |
1565 mm |
1755mm |
1985mm |
2190mm |
| Height including
tank dome: |
1350 mm |
2200mm |
2430mm |
2710mm |
| Height of tank
dome: |
610mm |
| Internal Ø tank dome: |
800mm |
| Weight: |
120kg |
150kg |
185kgs |
220kgs |
| Order No: |
372001 |
372002 |
372003 |
372004 |
| Load |
| Max axle load |
Suitable for vehicle loading |
| Earth covering |
800 - 1200mm |
| Groundwater |
| Groundwater-stable |
up to the middle of the tank |
| Earth Covering |
800mm - 1000mm |
|
|
| |
A well thought-out down to the smallest detail idea. |
| |
The Carat S underground tank has a rotating tank dome. The dome
can be
aligned with the connections independently of the tank. The height of the
tank
can be smoothly adjusted to suit the local conditions and it can be tilted by 5°. |
|
|
 |
| |
 |
| Logistical advantages of the Carat S |
The Carat S tank consists of two half shells which can
be stacked on top of each other allowing multiple tanks
to be
stacked on a single pallet. The tanks unique
stacking feature directly reduces transport costs and
environmental impact for vehicle emissions. |
|
| |
 |
| Easy and safe assembly |
| • |
The patented quick connection (in green), allows the
carat S tank to be assembled without screws in only
a few minutes. Disassembly is possible at any time. |
| • |
The first-class ERDM material used in the profile
seals (in yellow), has been laboratory tested
to last more than 25 years. |
| • |
The centering bolt (in orange) assures the accurate
and easy assembly of the two half shells preventing
any leaks.
|
|
|
|
|
|
|
|
 |
|
|
|
| • |
The tank with the incomparable price-performance ratio for over ground
installation in the garden or cellar or for underground fitting (with
support pipe). |
| • |
Due to its strong design and the fibre glass-reinforced material, the tank
can be safely installed in areas of high groundwater, provided the
appropriate installation instructions are strictly followed. |
| Accessories |
| • |
The tank interconnecting pipe set consists of special seals, which
remain sealed even with slight tank misalignment. |
|
|
| |
 |
|
| Technical Data |
| Capacity: |
1600 litres |
| Min Ø: |
1090 mm |
| Max Ø: |
1350 mm |
| Height: |
1600 mm |
| Material: |
fibre-glass reinforced PP
(UV stable & 100% recyclable) |
| Weight: |
approx. 60 kg |
| Connections: |
each 2 X DN 70, DN 100 &
DN 200 for standard KG pipes |
| Order No: |
200200 |
|
|
|
|
| |
| |
| Ease of transport |
| • |
Each half of the Herkules-Tank only weighs 30kg. |
| • |
This allows ease of transport & manual installation. |
| • |
The tank halves fit through any doorway (80cm wide and above)
|
|
|
| Patented seal connection mechanism |
 |
|
The two tank halves are quickly and easily joined
together, using the quick connectors supplied - no
screws needed. The tanks can be taken apart at any time. |
|
| |
| Secure seal |
 |
|
Laboratory tests estimate the tank joint seal to have
a life-span of more than 25 years. Tank design and
connections have all been tested and approved. |
|
|
|
|
|
|
|
|
|
|
|
|
| 2 in 1 water collector, 300 litres with plant cup |
| • |
Collector with two functions: rainwater collection and decoration with
plant cup included. |
| • |
For saving valuable rainwater and for decoration in the garden |
| • |
Stylish solution for collecting rainwater. |
| • |
High storage volume with small footprint. |
|
| |
 |
|
| Technical Data |
| Content: |
300 litres |
| Max Ø: |
620 mm |
| Height: |
1500 mm |
| Weight: |
16 kg |
| Order No: |
326113 (zinc grey) |
| Order No: |
211613 (sand stone) |
|
| |
 |
| |
| Wall tank 340 litres Appearance of natural stone. |
| • |
Stylish rainwater collector for the garden on natural stone-/wall
appearance. |
| • |
For rainwater harvesting in the garden. |
| • |
Simple fitting of the tap.
|
|
|
| |
 |
|
| Technical Data |
| Content: |
340 litres |
| Width: |
400 mm |
| Depth: |
1200 mm |
| Height: |
1090 mm |
| Weight: |
40 kg |
| Order No: |
326120 |
|
|
|
|
|
|
